Availability: | |
---|---|
Quantity: | |
HXGN-12
DGG
1. The characteristics and advantages of the sulfur hexafluoride SF6 ring main unit are worth considering when looking for a reliable and efficient solution for power distribution. This type of equipment is known for its high level of insulation, which ensures the safety and reliability of the electrical system.
2. Additionally, the sulfur hexafluoride SF6 ring main unit is compact in size, making it easy to install and maintain in various settings. Its modular design allows for flexibility and scalability, enabling users to customize the unit according to their specific needs.
3. Furthermore, the sulfur hexafluoride SF6 ring main unit is environmentally friendly, as it is designed to minimize greenhouse gas emissions and reduce the overall carbon footprint of the electrical system.
4. Overall, this type of SF6 ring main unit equipment offers a cost-effective and sustainable solution for power distribution, making it a popular choice among industries and utilities.
1. The characteristics and advantages of the sulfur hexafluoride SF6 ring main unit are worth considering when looking for a reliable and efficient solution for power distribution. This type of equipment is known for its high level of insulation, which ensures the safety and reliability of the electrical system.
2. Additionally, the sulfur hexafluoride SF6 ring main unit is compact in size, making it easy to install and maintain in various settings. Its modular design allows for flexibility and scalability, enabling users to customize the unit according to their specific needs.
3. Furthermore, the sulfur hexafluoride SF6 ring main unit is environmentally friendly, as it is designed to minimize greenhouse gas emissions and reduce the overall carbon footprint of the electrical system.
4. Overall, this type of SF6 ring main unit equipment offers a cost-effective and sustainable solution for power distribution, making it a popular choice among industries and utilities.
No. | Item | Unit | Parameters | |
1 | Rated voltage | kV | 7.2 / 12 | |
2 | Rated Current of Main Bus | A | 630 | |
3 | Rated Current | Incoming Cabinet | A | 630 |
Outgoing Cabinet (Combined Electrical Cabinet) | A | 125 (Biggest) | ||
4 | Rated Short-Time Withstand Current | kA | 20 | |
5 | Rated Peak Withstand Current | kA | 31.5 | |
6 | Rated Short-Time Making Current (Peak Value) | kA | 50 | |
7 | Rated Active Load Breaking Current | A | 630 | |
8 | Rated Closed-Loop Breaking Current | A | 630 | |
9 | Rated Cable Charging Current | A | 10 | |
10 | Rated Short-Time Withstand Current of Earthing Switch | kA | 20 | |
11 | Rated Peak Withstand Current of Earthing Switch | kA | 50 | |
12 | Rated Short-Time Making Current Making Peak Value of Earthing Switch. | kA | 50 | |
13 | Rated Breaking Current of Cable Point | A | 3150 | |
14 | 1min Power Frequency Withstand Voltage | Phase-Phase Vacuum Fracture | kV | 42 |
Isolation Fracture | 48 | |||
15 | Lightning Impulse Withstand Voltage | Phase-Phase Vacuum Fracture | kV | 75 |
Isolation Fracture | 85 | |||
16 | Mechanical Life Span | Vacuum Load Switch | Times | 10000 |
Isolation knife Earth Knife | 2000 | |||
17 | Load Switch | Average Closing Speed | m/s | 0.6±0.2 |
Average Opening Speed | 1.1±0.2 | |||
3-Phase Asynchrony | ≤2 | |||
18 | Fuse for the Combined Appliance | Maximum Rated Current | A | 125 |
Rated Short-Circuit Breaking Current | kA | 31.5 | ||
19 | Protection Level | IP3X |
No. | Item | Unit | Parameters | |
1 | Rated voltage | kV | 7.2 / 12 | |
2 | Rated Current of Main Bus | A | 630 | |
3 | Rated Current | Incoming Cabinet | A | 630 |
Outgoing Cabinet (Combined Electrical Cabinet) | A | 125 (Biggest) | ||
4 | Rated Short-Time Withstand Current | kA | 20 | |
5 | Rated Peak Withstand Current | kA | 31.5 | |
6 | Rated Short-Time Making Current (Peak Value) | kA | 50 | |
7 | Rated Active Load Breaking Current | A | 630 | |
8 | Rated Closed-Loop Breaking Current | A | 630 | |
9 | Rated Cable Charging Current | A | 10 | |
10 | Rated Short-Time Withstand Current of Earthing Switch | kA | 20 | |
11 | Rated Peak Withstand Current of Earthing Switch | kA | 50 | |
12 | Rated Short-Time Making Current Making Peak Value of Earthing Switch. | kA | 50 | |
13 | Rated Breaking Current of Cable Point | A | 3150 | |
14 | 1min Power Frequency Withstand Voltage | Phase-Phase Vacuum Fracture | kV | 42 |
Isolation Fracture | 48 | |||
15 | Lightning Impulse Withstand Voltage | Phase-Phase Vacuum Fracture | kV | 75 |
Isolation Fracture | 85 | |||
16 | Mechanical Life Span | Vacuum Load Switch | Times | 10000 |
Isolation knife Earth Knife | 2000 | |||
17 | Load Switch | Average Closing Speed | m/s | 0.6±0.2 |
Average Opening Speed | 1.1±0.2 | |||
3-Phase Asynchrony | ≤2 | |||
18 | Fuse for the Combined Appliance | Maximum Rated Current | A | 125 |
Rated Short-Circuit Breaking Current | kA | 31.5 | ||
19 | Protection Level | IP3X |
1. The altitude shall not exceed 1000 meters, and the altitude under special use conditions shall not exceed 2000 meters
2. Ambient Temp: Upper limit +40˚C, The average value measured within 24h shall not exceed 35˚C, and the lowest ambient air temp -15˚C
3. Relative humidity:
The Ave. value of relative humidity measured within 24h shall not exceed 95%
The average value of water vapor pressure measured within 24h shall not exceed 2.2kpa
The average monthly relative temperature shall not exceed 90%
The average monthly water vapor pressure shall not exceed 1.8kpa
4. The surrounding air is not appreciably polluted by dust, smoke, corrosive and/or flammable gases, vapors, or salt mist.
5. When the equipment is installed, the inclination from the vertical plane should not exceed 5˚C.
6. The equipment should be installed in a place free from severe pulling and impact.
7. Note: Users can negotiate with our company for special requirements.
1. The altitude shall not exceed 1000 meters, and the altitude under special use conditions shall not exceed 2000 meters
2. Ambient Temp: Upper limit +40˚C, The average value measured within 24h shall not exceed 35˚C, and the lowest ambient air temp -15˚C
3. Relative humidity:
The Ave. value of relative humidity measured within 24h shall not exceed 95%
The average value of water vapor pressure measured within 24h shall not exceed 2.2kpa
The average monthly relative temperature shall not exceed 90%
The average monthly water vapor pressure shall not exceed 1.8kpa
4. The surrounding air is not appreciably polluted by dust, smoke, corrosive and/or flammable gases, vapors, or salt mist.
5. When the equipment is installed, the inclination from the vertical plane should not exceed 5˚C.
6. The equipment should be installed in a place free from severe pulling and impact.
7. Note: Users can negotiate with our company for special requirements.
Ordering Instructions
The following information should be provided when ordering:
1.Main circuit system diagram;
2.Auxiliary circuitelectrical schematicdiagram,auxiliary circuit voltage;
3.List of components in the cabinet (including component model,name,specification,quantity);
4.Switchgear layout diagram;
5.Cabinetcolor(ifno requirements,supply accordingtoour company's standards);
6.List ofrequired spare parts;
7.Other special conditions of use.
Product Completeness
The following documents and attachments should beprovidedduring supply:
1.Certificate ofconformity;
2.Packing list;
3.User manual;
4.Factory inspecton report;
5.Relevant electrical drawings;
6.Spare partsspecified inthe contract;
7.Installation and operation manual for main components.
Ordering Instructions
The following information should be provided when ordering:
1.Main circuit system diagram;
2.Auxiliary circuitelectrical schematicdiagram,auxiliary circuit voltage;
3.List of components in the cabinet (including component model,name,specification,quantity);
4.Switchgear layout diagram;
5.Cabinetcolor(ifno requirements,supply accordingtoour company's standards);
6.List ofrequired spare parts;
7.Other special conditions of use.
Product Completeness
The following documents and attachments should beprovidedduring supply:
1.Certificate ofconformity;
2.Packing list;
3.User manual;
4.Factory inspecton report;
5.Relevant electrical drawings;
6.Spare partsspecified inthe contract;
7.Installation and operation manual for main components.